STANDARD COMPACT SCALE OPERATION & SERVICE MANUAL STANDARD COMPACT SCALE www.mt.com/xpress Model XRW
10 STANDARD COMPACT SCALE OVER/UNDER SETUP MODE Press key to access the Over/Under zone setup mode. The display will show the default 0.000. − Th
STANDARD COMPACT SCALE 11 OVER AND UNDER CURSORS OPERATION When an Over/Under value exists, the XRW will beep to indicate the condition provi
12 STANDARD COMPACT SCALE Several parameters in the scale can be changed to enable you to customize the scale to your individual needs. ACCESS TO
STANDARD COMPACT SCALE 13 WARNING DISCONNECT ALL POWER TO THIS UNIT BEFORE INSTALLING, SERVICING, CLEANING, OR REMOVING THE FUSE. FAILURE TO DO
14 STANDARD COMPACT SCALE For the following services, please contact your Xpress representative at www.mt.com/xpress. ACCESSING THE S
STANDARD COMPACT SCALE 15 FUNCTION OF THE KEYS Key Name Function Finish key Finish setup Toggle key Chose parameter Back key Moves back to the
16 STANDARD COMPACT SCALE CALIBRATION Example using a 6 lb scale: Step Operation Display Description 0 Press [CAL YES] Choose to calibrate the s
STANDARD COMPACT SCALE 17 BATTERY REPLACEMENT • Put the scale on the side as shown. Open the battery compartment with a Philips screwdr
18 STANDARD COMPACT SCALE BATTERY NOTICE z The (6V/5Ah rechargeable lead-acid) battery service life will be affected by the charge and discharge co
STANDARD COMPACT SCALE 19 ERROR MESSAGES The scale will display an error message if a problem or an incorrect keyboard entry is sensed. The error
2 STANDARD COMPACT SCALE ABOUT THIS MANUAL AND MT EXPRESS Thank you for purchasing a METTLER TOLEDO Xpress product. All of our equipment is assembl
20 STANDARD COMPACT SCALE SPECIFICATIONS Feature Description Capacity pounds 3 lb 6 lb 15 lb 30 lb Division pounds 0.001 lb 0.002 lb 0.005 lb
STANDARD COMPACT SCALE 21 GEO VALUE TABLE Use the following geo codes if you relocate the scale to a site other than the original location where it
22 STANDARD COMPACT SCALE PHYSICAL DIMENSIONS 9” 9” 12.2” 7” 5”
STANDARD COMPACT SCALE 23 Notes
STANDARD COMPACT SCALE www.mt.com/xpress Xpress Mettler-Toledo, Inc. 60 Collegeview Westerville, OH 43081
STANDARD COMPACT SCALE 3 FCC Approval This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
4 STANDARD COMPACT SCALE CONTENTS SAFETY NOTICE ...
STANDARD COMPACT SCALE 5 Product safety is a fundamental concern at MT Xpress. Use common sense and follow the simple precautions li
6 STANDARD COMPACT SCALE Spider Screw for shipping protection (3 total) Insert for shipping protection (3 total) This chapter gives detailed instru
STANDARD COMPACT SCALE 7 Note: The rear feet should be against the body of the scale tightly when cleaning the scale. After the scale has been cleane
8 STANDARD COMPACT SCALE DISPLAY KEYPAD Key Name Function Over/Under Setting Zero Key To return the scale to gross zero Setting
STANDARD COMPACT SCALE 9 STRAIGHT WEIGHING Place the item to be weighed on the platter. Remove the item from the platter, display will return to 0.
Comments to this Manuals