Mettler Toledo GA42 Operations Instructions download pdf (Page 18)

Functions

5.3 Dynamic weighing

Dynamic weighing is suitable for the weighing of unstable weighing samples. The mean value of the weighing results is

determined over a specified time period (weighing time). The more unstable the weighing sample, the longer the selected weighing

time.

Requirement

“F dYn A” for automatic start or “F dYn M” for manual start must be activated in the menu (Section 4). Factory setting is a

weighing time of 3 seconds (t = 3").

Dynamic weighing with automatic start (F dYn A)

➞ The «

““

“» key can be used select the dynamic weighing. The display shows the

symbol á.

➞ Load weighing sample. As soon as the balance is relatively stable, weighing

starts automatically.

During the weighing time, a "count down" runs in the display.

➞ Read off result.

The result of the dynamic weighing is displayed with ✱ (= calculated value) and

remains in the display until the weighing sample is removed from the weighing

pan or the container.

Switching between percent weighing and weight display

➞ Place weighing sample in centre of pan.

The weight of the sample is displayed as a percentage of the target weight.

➞ Press the «

““

“» key. The weight is displayed (in unit 1, and if the key is pressed

again, in unit 2, provided this function is activated).

➞ Return to display in percent: pressing the «

““

“» key again.

101.60

150.88 g

““

“

101.60

““

“

““

“

0.00 g

•

257.35 g

-- 3 --

-- 1 --

260.33 g

▼

…

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Comments to this Manuals

No comments

Mettler Toledo GA42 Operations Instructions Page 18

Comments to this Manuals