Mettler Toledo ICS425d-XS User Manual download pdf (Page 10)

BBA422 / BBA425 / BBK422

Introduction

User manual 22011381A 03/05

1.3.2 Connecting the power supply

CAUTION!

Before connecting the scale to the mains, check whether the voltage value printed on

the rating plate corresponds with the local mains voltage.

▲ Never connect the device if the voltage value printed on the rating plate is different

to the local mains voltage.

➜ Plug the mains plug into the socket.

After connection, the device performs a self-test. When the zero display appears,

the device is ready to weigh.

➜ Calibrate the device in order to obtain the greatest possible precision, see

Section 3.3.1.

Note Partially certified scales (scales with first-level certification) must be certified by an

authorised body or by the METTLER TOLEDO Service.

➜ Call METTLER TOLEDO Service.

Note The battery’s charging capacity can be reduced under continuous mains operation.

➜ To maintain the charging capacity, after a maximum of 4 weeks discharge the bat-

tery completely before recharging it.

Scales with a built-in battery can work independently from the mains for approxi-

mately 30 hours in normal operation. A prerequisite for this is that the background

lighting is switched off and that no peripheral devices are connected.

The device automatically switches to battery operation as soon as the mains supply

is interrupted. When the mains supply is restored, the device automatically switches

back to mains operation.

The battery symbol indicates the present charging level of the battery. 1 segment cor-

responds to approx. 25 % capacity. When the symbol flashes the battery must be

charged (min. 4 hours). The charging period is extended if work is continued during

charging. The battery is protected against overcharging.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

No comments

Mettler Toledo ICS425d-XS User Manual Page 10