19
19
5.3 Optional equipment
Calibration weights
Available as OIML weights (E1) (E2, F2 with certifi-
cate) for further details, see METTLER TOLEDO
weights brochure 721192
or as calibration weights (not OIML)
Draft shields
CB (all models) 224371
B154 224370
B303 224372
Note: CB and B154 draft shields can also be used
for B303 models.
Protective covers (set of 3)
B154, CB1503 228183
B303, CB203, CB603 224007
B502–3001, GB1302–3001 224008
GB6001 228182
GB16001 230018
Dust covers for B154 238465
AC adapters
Euro (230 V) 228063
Euro (ground contact) (230 V) 228198
UK (240 V) 228066
US (120 V) 228064
Japan (100 V) 228065
Australia (bench version) (240 V) 228190
Power supply unit
for hazard zone 2 for all models PS-EX 2
PowerPack
Line-independent, rechargeable exter-
nal power source, for 10 hours
weighing operation (see section 4.5) PP-B10
Connection plate PowerPack/balance
long, for B, GB 230166
short, for GB16001 230168
Hook for weighing below the balance
needed only for GB16001 21301097
Density kits for B154, CB
• for determination of solids 33360
• for determination of liquids
with displacement body 33360+210260
Transport case
• for all models (except GB16001) and
B models (except B154) accommo-
dation for balance and PowerPack 224009
• for GB16001, accommodation for
balance and PowerPack
230031
Antitheft devices
• Cable and lock (for all models) 590101
• Bolt and lock (not for GB16001) 229175
B-M emulation 21301730
Software EPROM for the use of B balances in sys-
tems together with METTLER TOLEDO PM balances
RS232C interface and interface accessories
Every B balance is fitted with an RS232C interface for
attachment to a peripheral device (e.g. printer or PC
with a 9-pin male connector). Matching to a different
device can be carried out in the menu (sections
4.2.5–4.2.8).
You will find a detailed description of the available
interface commands in the enclosed brochure “Ref-
erence Manual MT-SICS, available in English only).
The wide range of features of
the B balances regarding docu-
mentation of the results can not
be exploited to the full until a
printer, e.g. the GA42 or LC-
P45 from METTLER TOLEDO is
attached. The printed results
make a decisive contribution to
a simple way of working in
compliance with GLP/GMP.
Printers with normal paper
• Application printer with adjustment, statistics and
multiplication function as well as time and date,
24 characters LC-P45
• Simple printer, 24 characters,
without time/date GA42
Cables and cabling accessories
• RS9-RS25: (m/f), length 2 m 11101052
• RS9-RS9: (m/f), length 1 m 11101051
• RS9-RS9: (m/m), length 1 m 21250066
PG-S 16
15
96
IN
DATA
OUT
IN
GND
OUT
«HAND-SHAKE»
5.2 Interface
(44 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals