Mettler Toledo LP16 Operations Instructions download pdf (Page 14)

We distinguish between two levels of software. The first, simpler level, we call the Menu. It can be activated by pressing and holding the control

bar. The second software level is called the Configuration file. Details can be found in section «Configuring».

…calibrate your balance,

…use the weighing process adapter to set the weighing modes or the weighing sample, and

…use the vibration adapter to adapt the balance to the ambient conditions.

You can select the menu from the weighing mode. Switch on display and remove load from weighing pan. Then press

control bar (and keep depressed): The menu sequence starts. After the third menu step the balance returns to the

weighing mode. Now release the control bar.

Note: If you have selected the menu step «Weighing process adapter» or «Vibration adapter» and do not press the

control bar for 3 seconds, your balance will return automatically to the weighing mode. However, the actual settings are

stored (the same applies if you return to the weighing mode by pressing and holding the control bar).

A clear Menu

When the Menu is activated, you can…

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

No comments

Mettler Toledo LP16 Operations Instructions Page 14