Mettler Toledo MT Operations Instructions download pdf (Page 11)

Dispensing functions

Operating instructions 22012836B 09/08 11

IND690-Fill

1.9 Redispensing

If, for example, the weight value is briefly exceeded, the fine feed is switched off too

early and the current weight value (actual value) is below the target value.

During redispensing the fine feed is opened in intervals until the target value is

reached. Depending on the setting in the master mode, redispensing is carried out

manually or automatically, see section

2.2.

Manual redispensing

Prerequisite

MANUAL REDISPENSING is set in the master mode.

➜ When the display shows MANUAL, press and hold down the MAN key.

The fine feed is switched on in pulses as long as the key is pressed and until the

target value is reached.

1.10 Manual recorrection

If MANUAL CORRECTION ON is set in the master mode, the display shows MANUAL

CORRECTION after the actual-target comparison if the final weight lies outside the

tolerances.

➜ Recorrect manually and confirm correction with START key.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

No comments

Mettler Toledo MT Operations Instructions Page 11