What to do if …?
38 Operating instructions 22012836B 09/08
IND690-Fill
4 What to do if …?
Error / Display Possible causes Remedy
– EMPTY – • Output 2 = Remaining quantity,
container is automatically emptied
➜ Wait until the container is empty
– REFILL – • Output 2 = Fill quantity,
container is refilled
➜ Wait until the fill quantity is reached
– TARE – • Automatic taring during start of
dispensing process
➜ Wait until scale is stabilized and
tared
NOT ZERO • Below-level dispensing: Nozzle has
run dry
➜ Prevent nozzle from running dry,
acknowledge and restart
READY FOR DISPENSING • Filling process may be started ➜ Press START key
ENDVALUE REACHED • Item counter has reached end-value ➜ Recall sum and delete
MANUAL • Underfilled, manual redispensing
possible
➜ Press MAN key until target weight is
reached
LEARN MODE IS OFF • Learn mode switched off and limit 1
and/or limit 2 not entered
➜ Switch on learn mode or enter limit
LIMIT 2 TOO LARGE • Value for limit 2 too large ➜ Decrease limit 2
LIMIT 0 TOO LARGE • Limit 0 greater than limit 1entered ➜ Enter limit 0 less than limit 1
LIM 2 EXCEEDS
MAXLOAD
• Limit 2 is greater than the maximum
load of the active weighing platform
➜ Select limit 2 less than the maximum
load of this weighing platform
MANUAL CORRECTION • Container overfilled or underfilled ➜ Manually remove or add dispensing
product
MAX LIM • Limit 1 or limit 2 too large ➜ Decrease limit 1 or limit 2
MAX TOL • Tolerance too large ➜ Decrease tolerance
ZERO NOT ALLOWED • Entered value smaller than 1 ➜ Increase value
CLEAR SUM • Totalizing function switched on ➜ Clear sum
MEMORY FULL • Memory has reached maximum
value
➜ Clear sum
WRONG TARE • Container on weighing platform
outside entered tare limits
➜ Place correct filling container on
weighing platform
TMAX EXCEEDS
MAXLOAD
TMIN EXCEEDS
MAXLOAD
• Entered tare limits above weighing
platform maximum load
➜ Decrease values for tare min. and
tare max. accordingly
Comments to this Manuals