Mettler Toledo RS232C Instruction Manual download pdf (Page 48)

Miscellaneous

Your scale should be cleaned regularly

For cleaning the scale, a cloth with soap and water is adequate. You can clean the stainless steel pan with any commercial cleaning agents.

Never use any strong solvents.

Maintenance

Changing the protective covers

To protect the scale from dust, damage and chemically active weighing goods, the scale is supplied with an attached in-use protective cover, which

does in no way interfere with the operation of the scale. A soiled protective cover can be exchanged as follows:

Changing protective cover of terminal:

Grasp protective cover as shown in figure; pull upward.

Attach new protective cover.

Changing protective cover of weighing platform:

Remove weighing pan and pan support, four screws 65 of housing and four plastic grommets 66. Now

remove protective cover.

Attach new protective cover and fasten with four screws 65. Make sure that the lock washers are placed

at the bottom against the housing. Push in the four plastic grommets 66. Replace pan support and weighing

pan.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

No comments

Mettler Toledo RS232C Instruction Manual Page 48