Mettler Toledo MX Operations Instructions download pdf (Page 30)

Section 5: System settings

5.4 Specifiying the weighing parameters

“Weighing mode”

You can use this setting to match the balance to the type of weighing. Select “Universal”

weighing mode for all normal weighing processes, or “Dosing” for dispensing liquid or

powdery weighing samples. With this setting the balance responds very quickly to

minutest changes in weight. The “Sensor mode” setting delivers a raw, unfiltered

weighing signal and is only suitable for special applications. If the “Checkweighing”

setting is used, the balance only reacts to large changes in weight, and the weighing

result is very stable.

Factory setting: “Universal”

“Environment”

You can use this setting to adapt the balance optimally to the environmental conditions

at the workplace. If you work in surroundings which are practically free from temperature

fluctuations, drafts, and vibrations, select “Very stable”. On the other hand, if you work

in surroundings where the conditions are constantly changing, select “Very unstable”.

In between these two settings there is a choice of three further settings.

Factory setting: “Standard”

“Measurement release”

You can use this setting to specify how rapidly the balance considers the measurement

value to be stable and releases it. The “Very fast” setting is recommended if you require

rapid results and their repeatability is of secondary importance. The “Very reliable”

setting gives very good repeatibility of the measurement results, but lengthens the

stabilization time. In between these two settings there is a choice of three further settings.

Note: If you choose a setting other than “Reliable + fast”, a window appears with

additional information about the selected setting.

Factory setting: “Reliable + fast”

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 123 124

No comments

Mettler Toledo MX Operations Instructions Page 30