Mettler Toledo PS15 Specifications download pdf (Page 29)

Chapter 3: Configuring the Setup Parameters

Configuring Setup Parameters

(09/03) 3-5

Filter Program Block

The Filter program block lets you configure the noise filter that is used in

determining weight stability on the scale. The PS15 disregards environmental

noise such as vibrations that affect the weighing accuracy according to the

filter setting.

To configure the program block:

1. Press UNITS to display the FiLtEr prompt, then press ZERO.

2. Press ZERO to display the desired noise filter. Options include:

• Light

• Heavy

• Medium

3. Press UNITS to accept the displayed filter option. The PS15 continues to

the Baud program block.

Baud Program Block

This program block lets you set the baud rate (the speed at which data is

transmitted in bits-per-second).

To configure the program block:

1. Press UNITS to display the bAud prompt, then press ZERO.

2. Press ZERO to display the desired baud rate. Options include:

• 300 • 4800

• 1200 • 9600

• 2400 • 19200

3. Press UNITS to accept the displayed baud rate option. The PS15

continues to the ASCII program block.

ASCII Program Block

The ASCII program block lets you select the number of bits that make up an

ASCII character. Most METTLER TOLEDO equipment communicates using

seven data bits.

To configure the program block:

1. Press UNITS to display the ASCii prompt, then press ZERO.

2. Press ZERO to display the desired bit selection. Options include:

• Seven (7)

• Eight (8)

3. Press UNITS to accept the displayed option. The PS15 continues to the

Parity program block.

Settling time increases with heavier

filter setting.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

No comments

Mettler Toledo PS15 Specifications Page 29