Mettler Toledo GA42 Operations Instructions download pdf (Page 6)

4 METTLER TOLEDO DL36

Safety measures

2. Safety measures

The DL36 has been tested for the experiments and intended purposes documented in the

Operating Instructions. However, this does not absolve you from the responsibility of

performing your own tests of the product supplied by us regarding its suitability for the

methods and purposes you intend to use it for. You should therefore observe the following

safety measures.

Measures for your protection

– Ensure that you plug the power cable supplied into a receptacle outlet that

is grounded! In the absence of grounding, a technical fault could be lethal.

– Switch the instrument off and disconnect the power cable before you

change blown fuses! An electric shock could be lethal.

– Never work in an environment subject to explosion hazards! The housing

of the instrument is not gas tight (explosion hazard due to spark formation,

corrosion caused by the ingress of gases).

– When using chemicals and solvents, comply with the instructions of the

producer and the general lab safety rules!

Measures for operational safety

– Check the set operating voltage before you switch on the instrument! The

instrument may suffer damage if the operating voltage does not match the

line voltage.

– Use only fuses of the type specified in the Operating Instructions! (Risk of

fire)

– Have the instrument serviced only by METTLER TOLEDO Service!

– Always wipe off splashed liquids immediately! The instrument is not

water-proof.

– Exclude the following environmental influences:

• powerful vibrations,

• direct sunlight,

• atmospheric humidity greater than 80%,

• temperatures below 5 °C and above 35 °C,

• powerful electric or magnetic fields!

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

Mettler Toledo GA42 Operations Instructions Page 6