METTLER TOLEDO DL36 7
Putting into operation
4.2 Attaching peripheral devices
You can attach, e.g. the GA42 Printer and an analytical balance from METTLER TOLEDO and
a computer (see Section
8.5:
Selecting peripheral devices
and Section 12:
Standard and
optional equipment
).
4.3 Switching on the instrument
The DL36 operates in a voltage range of 100 - 120 or 220 - 240 V.
– Check the operating voltage set on the voltage selector before switching
on the instrument! (See Section 11:
Maintenance and servicing.)
– Plug in the power cable, connect to the power supply and switch on the instrument. The
following appears in the display:
DL36 V1.0 followed by
< Run > This display flashes until you press the Run key.
Input for detection electrode
Printer interface
Instrument on/off switch
Balance interface
Voltage selector and fuse
holder
Connector for power cable
Computer interface
Input for inner burette
Comments to this Manuals