Mettler Toledo AL-IC Operations Instructions download pdf (Page 23)

5 Weighing Made Simple

This section shows you how to perform simple weighings and how you can accelerate the

weighing process.

5.1 Switching the Balance On and Off

This section shows you how to perform simple weighings and how you can accelerate the weighing process.

Off

88888888

XXXXXXXX

Switching On

a) Remove any load from weighing pan.

b) Press «On».

The balance performs a display test (all segments in the display light up

briefly), "WELCOME", Software version, Maximum load and Readability

appears briefly. (Startup "FULL" mode only)

The balance is ready for weighing or for operation with the last active

application.

SHUTOFF

Off

Switching Off

Press and hold the «Off» key until "SHUTOFF" appears on the display.

Release the key.

After it has been switched off, your balance is in the standby mode. The display shows date,

time, maximum load and readability. As your balance needs no warm-up time in the standby

mode and is immediately ready for weighing.

When Quickstart "QUICK" (Advanced menu, topic "STARTUP") is selected: If you wish to perform

a weighing, you need now only place the sample on the weighing pan and the balance immedi

ately displays the result. There is no need to switch it on with the «On/Off» key.

Note:

●

Quickstart is not possible with approved balances.

●

Standby mode is available on line powered balances only.

MS-S / MS-L Models 23

Weighing Made Simple

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

No comments

Mettler Toledo AL-IC Operations Instructions Page 23