Mettler Toledo GA42 Operations Instructions download pdf (Page 36)

36 METTLER TOLEDO DE40/50/51 Density Meter

9. Calculation parameters (password protected)

This section describes how to select the type of results (density, specific gravity,

concentration), the number of decimals for these results and how to set the parameters for

the concentration calculation. These calculation parameters can be set for each of the 10

methods.

Press the <CALC.PARA> key.

9.1 Density: d, d(t/4), d(t/t)

Select CALC.PARA - Density

Select what density should be

displayed and printed:

d: mass density (real density).

d(t/4): relative density referred to

water at 4 °C.

d(t/t): relative density referred to

water at the measurement

temperature.

At 20 °C: d(t/t) = d

and d(t/4) = d

9.2 Result (Density, Concentration, BRIX, ALCOHOL, USER TABLE)

Select CALC.PARA - Result.

Select which result should be

displayed and printed:

d: density, resp. d/t/t) or d(t/4),

depending on the selected

density (previous step).

Conc.: concentration.

Note: here you can also select concentration applications, if they have been previously

loaded with a Memory Card (See also section 13 "Application Memory Cards):

BRIX, ALCOHOL, USER TABLE.

Calculation parameters

Method 0 < Calc.Parameter >

0.Density

1.Result

2.Temperature Compensation

3.Decimals

Method 0 < Density >

Density :d d(t/4) d(t/t)

Exit :[Execute]

Method 0 < Result >

Result :<d >

Exit :[Execute]

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

No comments

Mettler Toledo GA42 Operations Instructions Page 36