20
PR/SR balancesWeighing – basic functions
3 Weighing – basic functions
3.1 On / off switching
Switching on
1st possibility with V key
➜ Press V key briefly.
When "0.00 g" appears in the display, the balance is ready for operation.
For your information, the bottom line of the display shows the current weighing
application, e.g. "SIMPLE WEIGHING".
➜ Press any key briefly. The current configuration of the SmartBar is displayed.
2nd possibility with loading the balance ("QuickStart")
➜ Switch the balance on by placing a load of at least 10 grams on the weighing
pan.
In this case, the total weight is shown immediately.
SIMPLE WEIGHING
0.00 g-
AutoCal BPTGNet
1/10d
Off
On
T
C
1/10d
• If you use the setting "QuickStart" (section 6.4), the current total weight (gross weight) is automatically
displayed after a loaded balance has been switched on with the V key.
• In addition to "QuickStart", you can set other startup routines in the menu (see section 6.4).
Switching off
➜ Press and hold V key until "OFF" appears in the display. Release key.
➜ The display fades. If the balance remains connected to the power supply, there is
no need for a warm-up phase the next time it is switched on.
OFF
1/10d
Off
On
T
C
1/10d
3.2 Simple weighing
➜ Tare balance with Œ key (see also section 3.3).
➜ Place weighing sample in center of weighing pan.
➜ Read off result.
➜ Wait until the stability detector (o) fades.
0.00 g-
395.71 g-
395.69 g-
AutoCal BPTGNet
AutoCal BPTGNet
AutoCal BPTGNet
BPTGNet
BPTGNet
BPTGNet
Comments to this Manuals