73
PR/SR balances
➜ Mark the setting appropriate to the weighing task at hand in the bottom line of the
display.
"Check" < Setting for checkweighing, weight determination of samples
"Normal" Ö Universal setting (factory setting)
"Fill" Ü Setting for fine addition
"AdaptOff" Ö In this setting, the displayed weight value has a chrono-
logically fixed relation to the weight change.
➜ In the bottom line of the display mark the setting appropriate to the ambient
conditions (vibrations, drafts) at the balance location.
"Low" — Stable balance surroundings
The balance operates quickly, but is sensitive to external
vibrations.
"Medium" _ Normal balance surroundings (factory setting)
"High" – Unstable balance surroundings, vibrations, e.g. from
machines or floor oscillations
The balance operates more slowly, but is less sensitive to
vibrations.
➜ Confirm settings with H and return to preceding selection.
Vibr Process Repro
Weighing
Low Medium High
Vibrations
6.2.1 Matching the balance to the location – " Vibr "
➜ Select the weighing parameter "Vibr" under "Weighing".
The display shows "Vibrations" and the symbol — with its current setting.
6.2.2 Matching the balance to the type of weighing – " Process "
➜ Select the weighing parameter "Process" under "Weighing".
The display shows "WhgProcess" and the symbol Ö with its current setting.
➜ Confirm settings with H, return to preceding selection.
Vibr Process Repro
Weighing
Cal / Test
0
Menu
Vibr Process Repro
Weighing
Check Normal
Fill
WghProcess
AdaptOff
WghProcess
Vibr Process Repro
Weighing
Cal / Test
0
Menu
Menu – Weighing parameters – " WEIGH "
Comments to this Manuals