Mettler Toledo PR/SR Operations Instructions Page 37
- Page / 124
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
35
PR/SR balances
➜ After elapse of the weighing time, the weighing result appears in the bottom line
of the display as "dw=...". The item counter "n=..." is incremented by one.
"dw" and "n" remain in the display until the values are overwritten by a new result
or cleared with "Clear".
Dynamic weighing with automatic start
Requirement
The setting "Auto" must be activated in the menu under "APPL - > Dynamic -> Start"
(section 6.1.2).
➜ Place empty container on balance and tare.
➜ Add weighing sample to the container and start the first weighing manually. Each
subsequent weighing starts automatically as soon as the loaded weight exceeds
the minimum load specified under "MinWeight" in the menu and the start
conditions are met (see section 6.1).
AutoCal BPTGNet
823.45 g-
Start n=0 dw=0.00g
AutoCal BPTGNet
823.45 g-
Start n=0 dw=0.00g
AutoCal BPTGNet
--2--
Start n=0 dw=0.00g
AutoCal BPTGNet
--1--
Start n=0 dw=0.00g
AutoCal BPTGNet
820.12 g-
Start n=1 dw=825.67g
BPTGNet
BPTGNet
AutoCal BPTGNet
0.00 g-
Start n=1 dw=825.67g
BPTGNet
➜ Remove weighing sample from container.
If desired, tare the balance with the Πkey.
During the weighing, a "countdown" runs in the display and the e symbol
flashes.
• The next weighing then starts automatically when the weight display shows a value below that specified
under "MinWeight" in the menu following removal of the sample and the new, loaded weight exceeds this
value.
• You can also determine lower values manually with "Start".
• You can terminate the current weighing with the N key or restart it with "Start". If the balance is overloaded
during the weighing, the weighing is automatically aborted and the message "Abort" outputted.
• Depending on the selection under "Results", you can also display values other than "dw" in the bottom line.
• If you have activated the sample identification in the menu (section 4.3), you are prompted for entry with
"SID=…" before every start.
Applications – Dynamic weighing
- Operating instructions 1
- METTLER TOLEDO 1
- PR/SR balances 1
- Leerseite 2
- Contents Page 4
- 1.3 Layout 7
- SmartBar 8
- 0000000000000 10
- 2 Startup procedure 11
- 2.3 Leveling 13
- 345.78 g 16
- Cal done 16
- Cal / Test 17
- 2.6 Testing balance 18
- -0.03-g-D: 19
- 1999.98 g 19
- Test Calibration Repro 21
- 3 Weighing – basic functions 22
- 3.3 Zero setting and taring 23
- Æ key (section 3.6) 24
- G key briefly 25
- 3.8 Working with the SmartBar 26
- 27.5385 oz 27
- A-Z a-z 0-9*! < 28
- 4 Extended basic functions 30
- Header LotID 31
- 1 2 3 4 5 6 7 8 9 0 < 32
- PT=99.71 g 33
- 836.02 g 33
- 935.73 g 33
- 1258.20 g 34
- 44.3815 oz 34
- 7.88 g/m 34
- 5 Applications 35
- 423.45 g 36
- 420.12 g 36
- 823.45 g 37
- 820.12 g 37
- Max n=10_ 38
- Start n=100 dw=331.27g 39
- Results Clear WghTime 39
- Start n=0 dw=0.00g 39
- -523.45 g 40
- Application—10 PCS 40
- Fix10 Opt Set 41
- 10 20 30 Var PcWgt Fix 41
- 1 2 3 4 5 6 7 8 9 0 < 41
- 3318.4 g 42
- Fix10 Opt Set PCS 43
- Fix25 Opt Set PCS 43
- M+ n=100 ∑=4567.89g M 44
- M+ n=1 ∑=423.45g M 45
- 421.45 g 46
- M+ n=100 ∑=4567.89g M 48
- M+ n=0 ∑=0.00g M 48
- 823.60 g 50
- +T=1.25 g 51
- M+ n=0 x=0 Diff 52
- M+ n=1 x=51.120g Diff 52
- M+ n=2 x=51.085g Diff 52
- SetRef Results Clear 54
- <T- >T+ mean sdev srel 54
- 1 2 3 4 5 6 7 8 9 0 < 55
- M+ n=0 x=0 Diff 55
- M+ n=1 x=51.120g Abs 55
- 102.34 % 56
- 51.17 g 56
- NextComp 59
- -0.07 g 60
- 828.76 g 61
- M+ n=12 Results Comp 62
- M+ n=0 Results Comp 62
- LANGUAGE 6.5 64
- 1 2 3 4 5 6 7 8 9 0 . < 67
- G (return to main menu) 70
- Weighing 74
- Ü Setting for fine addition 75
- Ö with its current setting 75
- CustomUnit 78
- 4 CalInt 83
- Calibration 83
- ExtWeights 83
- Settings Printout Beep 84
- APPL WEIGH CAL SYSTEM 84
- Printout 85
- G key has 86
- Date Time BalID Icons 87
- Set dd.mm.yy mm/dd/yy 87
- 1 9:1 2:2 0 88
- V key, it 89
- V key is pressed, or 89
- PassWord 90
- Language 91
- ≥ 8000 g ≥ 4000 g ≥ 8000 g 98
- ≥ 20000 g ≥ 20000 g ≥ 20000 g 99
- 7.2.2 Dimension drawings 100
- METTLER TOLEDO 101
- Dimension drawing SR balances 102
- Standard equipment 102
- 7.3 Optional equipment 103
- 8 Appendix 105
- 8.3 Messages in the display 110
- Configure 112
- Application 113
- InitCal done 113
- 5000.00 g 113
- 8.5 Maintenance 114
- 8.7 Changing the battery 116
- SOP checklist 118
- 8.9 Index 119
- PR/SR balances Appendix 121
- PR/SR balancesAppendix 122
- P11780234 124
Related products and manuals for Kitchen scales Mettler Toledo PR/SR
(50 pages)
(8 pages)© 2020, manymanuals.com. All rights reserved. | 1.377 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals