Mettler Toledo PR/SR Operations Instructions Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 124
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
25
PR/SR balances Weighing – basic functions
The weight display and the selection in the bottom line of the display change. To
clear the second unit, "Unit2" must be reset to "g" or must be set in the same way
as "Unit1" in the menu.
g
27.5385 oz
AutoCal BPTGNet
3.9 Alphanumeric entry using the SmartBar
You can use the SmartBar to enter alphanumeric information, e.g. sample identification or a password.
Alphanumeric entry of a sample identification (SampleID)
1. Setting in the menu
To allow a sample identification to be entered during weighing, "SampleID" has first
to be selected in the menu. Proceed as follows:
Press SmartBar below "SYSTEM".
Entry into menu: Press and hold G key until "MENU" appears in the display.
Press SmartBar below "Printout".
Press SmartBar below "Header".
Press SmartBar below the "/" character.
The display switches to the next selection under the key word "Header".
Example
Press SmartBar below "SampleID", "SampleID" is marked by ":".
End menu: Press and hold G key until "Stored" is displayed.
The balance is again in the weighing mode, the selected application – here
"SIMPLE WEIGHING" – appears in the display.
By pressing any key "SampleID" is available in the SmartBar line.
SampleID
Header
SIMPLE WEIGHING
0.00 g-
AutoCal BPTGNet
Cal / Test
0
Menu
APPL WEIGH CAL SYSTEM
MENU
Settings Printout Beep
System
Header WeightTransfer
Printout
Date Time BalID LotID
Header
Cal / Test
0
Menu
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 123 124

Comments to this Manuals

No comments